manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 316

3.

Restore specification files.

Restore the following files saved in "

A.3 Backing Up Management Information (for Windows)

" by executing the copy command:

-

Copy source volume locking specification file

-

Copy destination volume locking specification file

-

Timeout value setting file for the concurrent suspend function

 

 Information

The volume locking specification files might not exist according to the environment. If they were not backed up in "

A.3 Backing

Up Management Information (for Windows)

", this step is not needed.

For Non-clustered Systems on Management Server Which Also Serves as Managed Server

 

File for Restoration

Full Path Name for Restoration Destination

Copy source volume locking
specification file

environmentDir

\ACM\etc\repl\data\SRCLOCK.INI

Copy destination volume locking
specification file

environmentDir

\ACM\etc\repl\data\DSTLOCK.INI

Timeout value setting file for the
concurrent suspend function

environmentDir

\ACM\etc\repl\data\DEFAULT\check.ini

For Non-clustered Systems on Managed Server

 

File for Restoration

Full Path Name for Restoration Destination

Copy source volume locking
specification file

environmentDir

\etc\repl\data\SRCLOCK.INI

Copy destination volume locking
specification file

environmentDir

\etc\repl\data\DSTLOCK.INI

Timeout value setting file for the
concurrent suspend function

environmentDir

\etc\repl\data\DEFAULT\check.ini

For Clustered Systems

 

File for Restoration

Full Path Name for Restoration Destination

Copy source volume locking
specification file

<

shared disk

>:\etc\opt\swstorage\etc\repl\data\SRCLOCK.INI

Copy destination volume locking
specification file

<

shared disk

>:\etc\opt\swstorage\etc\repl\data\DSTLOCK.INI

Timeout value setting file for the
concurrent suspend function

<

shared disk

>:\etc\opt\swstorage\etc\repl\data\DEFAULT\check.ini

 

 Note

Do not restore pre-processing and post-processing scripts for replication management function by using copy command.

The sample of pre-processing and post-processing scripts may be changed when upgrading a version. If you have customized pre-
processing and post-processing scripts before the upgrade, re-customize it in reference to pre-processing and post-processing
scripts which has been saved before the upgrade.

4.

If using the backup and the restoration function of the Exchange Database, restore the following management information:

-

Drive letter map file

- 292 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands