See
Refer to the following sections in the
ETERNUS SF Web Console Guide
for this version for details on the above operations:
-
"Register Server"
-
"Change Server Information"
-
"Reload Server Configuration Information"
-
Reconfiguring the iSCSI HBA information
If iSCSI was defined before the upgrade, based on the information that was backed up in step 1 of "
5.1.1.1 Backing Up Operational
Environment of Previous Version
", perform the following procedure:
1.
Log in to Web Console.
2.
Select the server featuring the iSCSI HBA, click Add under HBA on the Action pane and then enter the HBA information.
Refer to "Add HBA" in the
ETERNUS SF Web Console Guide
for this version for information on how to add HBA.
-
Restarting the performance monitoring and/or the threshold monitoring
If the performance monitoring and/or the threshold monitoring was performed with the previous version, based on the information
that was backed up in step 1 of "
5.1.1.1 Backing Up Operational Environment of Previous Version
", restart the performance
monitoring and/or the threshold monitoring.
1.
Start the performance monitoring.
2.
Start the threshold monitoring If it was performed.
See
Refer to the following sections in the
ETERNUS SF Storage Cruiser Operation Guide
for this version for details on the above
operations:
-
"Instruction for Performance Management"
-
"Setting Monitoring Intervals"
-
"Instruction for Threshold Management"
-
"Setting Threshold Monitoring Hours"
-
"Setting Threshold Monitoring Information"
Note
If the performance monitoring fails to start when you restart ETERNUS SF Manager after resuming operations, use the following
procedure for recovery:
1.
Confirm the output error message and remove the cause of the failure.
2.
On the Action pane, click Reload Conf. to reload the device information.
3.
If performance monitoring is being performed, stop the performance monitoring once and restart it.
Refer to "Instruction for Stopping Performance Management" in the
ETERNUS SF Storage Cruiser Operation Guide
for details
on the performance monitoring stopping.
-
Redefining the administrator information
Based on the information that was backed up in step 1 of "
5.1.1.1 Backing Up Operational Environment of Previous Version
", define
the administrator information.
Refer to "Display/Change Contact Information" in the
ETERNUS SF Web Console Guide
for this version for information on how to
define the administrator information.
- 35 -
