manualshive.com logo in svg

Fujitsu ETERNUS SF Express V16.6, Migration Manual

Share
Download
Fujitsu ETERNUS SF Express V16.6 Migration Manual Download Page 237

 

Upgrade Patterns

Descriptive Contents of Version Information

Before

After

Version 16.0 to 16.6

Version=V16.0

Version=V16.6

Version 16.1 to 16.6

Version=V16.1

Version 16.2 to 16.6

Version=V16.2

Version 16.3 to 16.6

Version=V16.3

Version 16.4 to 16.6

Version=V16.4

Version 16.5 to 16.6

Version=V16.5

 

 Note

Do not change anything other than the version information.

3.

If Managed Server transactions coexist in the clustered system, edit the environment setting files for AdvancedCopy Manager on
the shared disk for shared data of Managed Server transactions, on the primary node for a target service.

On the primary node for target transactions, edit the following files:

-

<

Mount point of shared disk for shared data of Managed Server transaction

>/etc/opt/swstorage/clsetup.ini

-

<

Mount point of shared disk for shared data of Managed Server transaction

>/etc/opt/swstorage/swstg.ini

Change the version information within each file, as follows.

 

Upgrade Patterns

Descriptive Contents of Version Information

Before

After

Version 16.0 to 16.6

Version=V16.0

Version=V16.6

Version 16.1 to 16.6

Version=V16.1

Version 16.2 to 16.6

Version=V16.2

Version 16.3 to 16.6

Version=V16.3

Version 16.4 to 16.6

Version=V16.4

Version 16.5 to 16.6

Version=V16.5

 

 Note

Do not change anything other than the version information.

4.

Recover the activation suspension script of Management Server tasks saved in "

10.2.2.1 Preparing for Upgrade

".

5.

In cases when Managed Server transaction coexist in the cluster system, recover the AdvancedCopy Manager daemon start and
stop script of the Managed Server transaction saved in "

10.2.2.1 Preparing for Upgrade

".

6.

Perform the kernel parameter tuning.

 

 See

Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the 

ETERNUS SF Installation and Setup Guide

 for this

version for information on tuning.

- 213 -

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands