-
VMware vCenter Server configuration information
If VMware vCenter Server was registered in the Storage Cruiser's manager of the previous version, record the configuration
information of the previous version with the following procedure:
1.
Log in to Web Console.
2.
On the global navigation tab, click Server.
3.
On the Category pane, click Correlation.
The items of the Category pane change into the items concerning the correlation management.
4.
On the Category pane, click End to End View (VMware).
The VMware End to End view list is displayed in the Main pane.
5.
Record the IP address and the port number of VMware vCenter Server that are displayed in the Main pane.
-
Hyper-V host configuration information
If the Hyper-V hosts were registered in the Storage Cruiser's manager of the previous version, record the configuration
information of the previous version with the following procedure:
1.
Log in to Web Console.
2.
On the global navigation tab, click Server.
3.
On the Category pane, click Correlation.
The items of the Category pane change into the items concerning the correlation management.
4.
On the Category pane, click End to End View (Hyper-V).
5.
Of the servers displayed in the Main pane, record the IP address of the server for which the Registration as Hyper-V
Host column is displayed as "Registered".
2.
Back up of the operation environment of the previous version of the Storage Cruiser's manager.
Refer to "
A.33 Capacity Necessary for Backup of Previous Version
" for information on the capacity required to perform a backup.
a.
Log on to the server using Administrator privileges.
b.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into
the DVD-ROM drive.
Refer to "DVD-ROM Contents" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the DVD-
ROM structure and detailed contents.
c.
Stop the ETERNUS SF Manager service
Execute the following batch file:
$INS_DIR\Common\bin\Stop_ESFservice.bat
The $INS_DIR is the program directory specified at the ETERNUS SF Manager installation.
d.
Implement backup of the previous version.
Execute the following batch file. For
backupDir
, specify the directory in which to store the backup data with an absolute
path. For
tmpDir
, specify a directory in which to temporarily place the files related to the performance management
function with an absolute path. When the performance management function is not being used, it is unnecessary to
specify a directory for the
tmpDir
.
dvdromDrive:\Manager_windows\vuptools\esfpreinst.bat backupDir [tmpDir]
When the backup fails, after confirming the output error message and removing the cause of the failure, execute the batch
file again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory names.
-
The number of characters in a directory name must be up to 220.
- 42 -
