b.
Execute the stgxfwcmmodsrv command with the -f option.
programDir\ACM\bin\stgxfwcmmodsrv -f serverInformationChangeInstructionFileName
-
When you use both the IPv4 and IPv6 addresses with the Management Server:
Set the IPv4 address used.
The following operations are executed after the Upgrade Installation is completed and the IPv6 address is added as the IP
address of the Management Server.
a.
Create a server information change instruction file on the Management Server. Describe both the IPv4 and the IPv6
addresses as the IP address after it changes in the server information change instruction file.
b.
Execute the stgxfwcmmodsrv command with the -f option.
programDir\ACM\bin\stgxfwcmmodsrv -f serverInformationChangeInstructionFileName
Information
-
Refer to "Changing the IP address of Management Server" in the
ETERNUS SF AdvancedCopy Manager Operation Guide
(for Windows)
for this version for the update procedure of IP address information.
-
Refer to "stgxfwcmmodsrv (Server information change command)" in the
ETERNUS SF AdvancedCopy Manager Operation
Guide (for Windows)
for this version for information on the command.
Point
When the Management Server has multiple IP addresses, specify an IP address that can communicate with the Management
Server from all of the AdvancedCopy Manager's agents.
Then, click Next. If an entered value is already being used, the page is displayed again.
- 327 -
