![background image](http://html1.mh-extra.com/html/ducati/749dark/749dark_manual_2537616219.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Ruote - Sospensioni - Freni
Wheels - Suspensions - Brakes
sezione / section
G 2
15
749/749 DARK/749S
- M.Y. 2005 - edizione/edition 00
Ricomposizione forcella
anteriore
Bloccare lo scorrevole in morsa.
Proteggere l'estremità del tubo
portante con nastro.
Importante
Prima di installare l'anello di
tenuta (23), lubrificare i bordi di
scorrimento con olio forcella o con
grasso per tenute.
Installare i seguenti componenti nello
scorrevole:
raschiapolvere (25);
anello di fermo (24);
anello di tenuta (23).
Importante
Installare l'anello di tenuta con
la superficie marcata rivolta verso il
raschiapolvere.
Installare i seguenti componenti sullo
scorrevole:
scodellino (22);
boccola di guida (21);
boccola (20).
Note
Prima di assemblare le due parti,
lubrificare le superfici di scorrimento
delle boccole con olio forcella.
Spingere la boccola di guida (21) e lo
scodellino (22) nel fodero esterno
utilizzando l'attrezzo premi anello di
tenuta (F, cod.
88713.1096
).
Spingere l'anello di tenuta (23)
nel fodero utilizzando la stessa
attrezzatura.
Installare l'anello di fermo (24) e
il raschiapolvere (25).
Importante
Il fodero esterno deve scorrere
liberamente sullo scorrevole.
Supportare esclusivamente con le
mani gli scorrevoli e i foderi esterni
per non danneggiare gli anelli di
tenuta e le boccole di guida.
Reassembling the front fork
Clamp the slider in a vice.
Tape the rim of the stanchion tube
to protect it from damage.
Important
Before installation, smear the
sliding edges of oil seal (23) with fork
oil or oil seal grease.
Fit the following components into the
slider:
dust seal (25);
circlip (24);
oil seal (23).
Important
Install the oil seal with the mark
facing the dust seal.
Fit the following components on the
slider:
cap (22);
guide bush (21);
bush (20).
Notes
Before assembling the two
parts, smear the sliding surfaces of
the bushes with fork oil.
Press the guide bush (21) and the
cap (22) into the sleeve using the oil
seal tool (F, part no.
88713.1096
).
Drive oil seal (23) into sleeve using
the same tool.
Fit circlip (24) and dust seal (25).
Important
The sleeve must slide freely on
the slider. Handle sliders and outer
sleeves with your hands. The use of
tools might damage the oil seals and
guide bushes.
23
20
21
21
23
22
24
25
88713.1096
F
F
Summary of Contents for 749DARK
