![background image](http://html1.mh-extra.com/html/ducati/749dark/749dark_manual_2537616237.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Ruote - Sospensioni - Freni
Wheels - Suspensions - Brakes
sezione / section
G 5
33
749/749 DARK/749S Aggiornamento/Update
- M.Y. 2006 - edizione/edition 00
Utilizzando lo stesso tampone inserire
gli anelli di tenuta (6) nuovi, disposti
come in sezione, accostandoli agli
astucci appena montati.
Per il montaggio dei cuscinetti a
sfere (9) è necessario disporre
dell’attrezzo cod.
88713.2409
composto da:
(A) - tampone per cuscinetto interno;
(B) - tampone per cuscinetto esterno;
(C) - perno di guida.
Introdurre un cuscinetto (9) nuovo e il
distanziale interno (10) sul tampone (A)
e posizionarlo sul lato interno del
supporto lato destro del forcellone.
Inserire il perno di guida (C) negli
astucci precedentemente montati e
inserire l’estremità nel foro interno
del tampone (A).
Portare in battuta il cuscinetto (9) sul
forcellone.
Inserire l’altro cuscinetto nuovo (9)
all’estremità esterna del tampone (A).
Contrastare con il tampone (A) e,
utilizzando il tampone (B), portare in
battuta il cuscinetto esterno sul
distanziale (10): sfilare gli attrezzi
utilizzati.
Prima del rimontaggio del forcellone (17)
è necessario lubrificare con grasso
prescritto i cuscinetti (9), gli astucci a
rullini (7) e gli anelli di tenuta (6).
Use the same tool to fit the new seal
rings (6), as shown in the sectional
view, so that they are tight up against
the newly installed roller bearings.
To install the ball bearing races (9) you
will need tool part no.
88713.2409
composed of:
(A) – drift for internal bearings;
(A) – drift for external bearings;
(C) – guide pin.
Fit a new bearing (9) with the internal
spacer (10) onto the tool (A) and
position it on the interior of the RH
side support of the swingarm.
Insert the guide pin (C) into the
previously mounted roller bearings
and insert the other end in the bore
in the tool (A).
Drive the bearing (9) fully into the
swingarm.
Fit the other new bearing (9) at the
outer end of tool (A).
Using tool (A) as a stop, use tool (B) to
drive the external bearing up against
spacer (10): remove the tools.
Before reinstalling the swingarm (17),
grease the ball bearings (9), roller
bearings (7) and seal rings (6) with
the recommended grease.
6
C
10
17
6
7
6
C
A
9
88713.2409
C
10
A
B
9
C
Summary of Contents for 749DARK
