![background image](http://html1.mh-extra.com/html/ducati/749dark/749dark_manual_2537616455.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 4.5
91
749/749 DARK/749S
- M.Y. 2005 - edizione/edition 00
Composizione gruppo
testa
Note
Le teste nude sono uguali.
Solo la definizione del lato aspirazione
e scarico configura la testa per il
montaggio sul cilindro verticale o
orizzontale.
Tutte le figure di questo capitolo si
riferiscono ad una testa verticale.
Nel testo, la testa viene identificata, in
senso longitudinale, dal lato
aspirazione o scarico e, in senso
trasversale, dal lato distribuzione o
opposto distribuzione (lato raccordi
acqua).
Rimontaggio anelli di tenuta
guidavalvola
Posizionare la testa nuda sull'apposito
supporto (
88713.2103
749/749 DARK
-
88713.2346
749S).
In caso di montaggio di una testa (26)
nuova, verificare che in corrispondenza
del pozzetto candela sia montato il
supporto (27) di ritegno interno dei
perni bilancieri di chiusura.
Lubrificare con olio motore gli anelli di
tenuta dei guidavalvola (8) e inserirli
dal lato provvisto di molla sull'attrezzo
88713.1429
.
Inserire l'estremità dell'attrezzo nel
guidavalvola e con martello portare
in posizione gli anelli di tenuta sui
guidavalvola (8).
SCA
R
ICO/EXHAUST
SCARICO/
EXHAUST
ASPIRAZIONE/
INTAKE
ASP
IRAZ
ION
E/
IN
TAKE
Reassembling the head
unit
Notes
The bare heads are identical.
Only their definition as intake and
exhaust side configures them for
installation on the vertical or
horizontal cylinder.
All the figures in this chapter refer to
a vertical head.
In the text, the head is identified
along the longitudinal axis by its
intake and exhaust sides and, along
the transverse axis, by its timing and
opposite side (water fitting side).
Reinstalling the valve guide
seal rings
Position the bare head on the special
support (
88713.2103
749/749 DARK -
88713.2346
749S).
If fitting a new head (26), check that
the internal support (27) for the closing
rocker arm shafts is mounted at the
sparkplug seat.
Use engine oil to lubricate the valve
guide seal rings (8) and insert them
from the spring side onto tool part
no.
88713.1429
.
Fit the end of the tool into the valve
guide and use a mallet to tap the seal
rings (8) home into the guides.
26
26
27
8
8
Summary of Contents for 749DARK
