![background image](http://html1.mh-extra.com/html/ducati/749dark/749dark_manual_2537616451.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 4.5
87
749/749 DARK/749S
- M.Y. 2005 - edizione/edition 00
Revisione sede valvola
Controllare visivamente le sedi: non
devono presentare tracce di vaiolature
o incrinature. Riscontrando lievi danni
è possibile eseguire una fresatura
utilizzando le apposite frese
monotaglienti a
45°
e
60°
.
Eseguire poi la smerigliatura delle
valvole e la verifica della tenuta.
In caso di danni eccessivi alle sedi
valvola è possibile eseguirne la
sostituzione utilizzando sedi
maggiorate di
0,03
e
0,06 mm
,
sul diametro esterno, disponibili
a ricambio.
Importante
In caso di sostituzione delle
sedi, è necessario sostituire anche
i guidavalvola.
Operare come segue:
Rimuovere le sedi usurate fresandole
con cautela per non danneggiare
l'alloggiamento sulla testa.
Controllare il diametro degli
alloggiamenti sulla testa e scegliere la
sede valvola maggiorata più idonea,
considerando una interferenza di
montaggio di
0,04÷0,10 mm
.
Scaldare lentamente ed
uniformemente la testa fino ad una
temperatura di
150 °C
e raffreddare le
nuove sedi con ghiaccio secco.
Piantare le sedi perfettamente in
quadro nel proprio alloggiamento
utilizzando gli appositi punzoni sedi
dei guidavalvole.
Lasciare raffreddare la testa e quindi
procedere alla lavorazione delle sedi
facendo riferimento alle seguenti
quote:
CA = Ø 39,6 ± 0,025 mm
CS = Ø 32,6 ± 0,025 mm
S = 1,485 mm
D = 0,7÷0,9 mm
Importante
Non usare pasta smeriglio
dopo la fresatura finale.
Overhauling the valve seat
Visually inspect valve seats for
cracking or pitting. Minor damage
can be repaired by milling with special
45°
and
60°
single-blade cutters.
Grind valves and run a leak test.
If valve seat is excessively damaged,
fit oversized seats. Replacement
seats are available with
0.03
and
0.06
mm oversized outer diameters.
Important
When you change the valve
seats, change the valve guides as well.
Proceed as follows:
Remove the worn seats. Mill carefully
to avoid any damage to head bores.
Check diameter of head bores and
choose the oversized valve seat that
will give an interference fit of
0.04-
0.10 mm
.
Heat head gradually and evenly up
to
150 °C
and chill new valve seats in
dry ice.
Drive the seats perfectly square into
the head bores using the appropriate
valve guide seat drifts.
Allow head to cool down and machine
seats to following dimensions:
CA = Ø 39.6 ± 0.025 mm
CS = Ø 32.6 ± 0.025 mm
S = 1.485 mm
D = 0.7–0.9 mm
Important
Do not use grinding paste
after final milling.
60 45
24±0.02
16±0.02
CA
D
S
S
D
CS
Summary of Contents for 749DARK
