Docomo N-09A, Instruction Manual

Page: 77 / 572

75
Vo
ice/Videophone Ca
lls/PushTalk
Enlarging an image to be sent
Enlarge your image and send it to the other party
during a videophone call.
z
The zoom can be adjusted between 2 steps, 1×
and approximately 2×. If you end the videophone
call, the zoom ratio returns to 1× (standard).
z
The substitute image being sent cannot be
enlarged.
1
During a videophone call
X
Use
v
to adjust the ratio
Decorating the videophone call screen
<Decoration>
Decorate your videophone call screen (your camera
image) with a stamp and frame.
1 Videophone in-call screen (p.52)
X
u
(FUNC)
X
“Decoration”
X
Select
any item:
Frame
……
Select a frame from the Frame
selection screen.
Stamp
……
Select a stamp from the Stamp
selection screen and decide the paste position.
■
To erase a frame or stamp
Select “Off decoration” from the function menu of
the videophone in-call screen.
Sending a message during a
videophone call (sending camera
image)
<Petit message>
1 Videophone in-call screen (p.52)
X
u
(FUNC)
X
“Petit message”
X
Enter a message
The message is displayed. The message
disappears automatically in approximately 15
seconds.
■ To cancel entering a message in text entry
X
Erase the message
X
t
■ To erase the message manually after it is
displayed
X
t
(1 second or longer)
You can also erase a message by selecting “Off
decoration” from the function menu.
<Auto redial as voice>
z
When a videophone call is switched and redialed
as a voice call, not digital communications
charges but voice call charges apply.
z
When a call is redialed, only the voice call is
logged in “Redial”/“Dialed calls”.
z
Even if “Auto redial as voice” is set to “ON”, dialing
may not be possible depending on the network or
other party, e.g. the line is busy.
<Hands-free switch>
z
Even when “Hands-free switch” is set to “ON”,
handsfree does not activate automatically in the
following cases:
• While Manner mode is set
• When an earphone/microphone (optional) is
connected (the microphone operation is in
accordance with “Headset mic. setting”)
• When holding a call or Record message is
activated for an incoming call
<V.phone while packet>
z
Even when “V.phone priority” is set, you cannot
answer a videophone call if you are using multi
access such as i-mode communication during a
voice call.
z
When set to “Packet downld priority”, “V.phone
answerphone” or “Call forwarding”, received
videophone calls are recorded as “Missed calls” in
“Received calls”.
z
Even when set to “V.phone priority” or “Packet
downld priority”, the “Voice Mail” or “Call
Forwarding” service is activated if the ring time for
the “Voice Mail” or “Call Forwarding” service is set
to 0 second.
N
N
z
If “Front camera Reverse” is set to “OFF” for your
camera image, the decoration is displayed
normally, and a stamp with text can be read
correctly.
N
z
If “Front camera Reverse” is set to “OFF” for your
camera image, the decoration is displayed
normally, and text can be read correctly.