Docomo N-09A, Instruction Manual

Page: 399 / 572

397
Network Serv
ices
Call Waiting
<Call Waiting>
Answer incoming voice calls even if you are already
on the line. You will hear the Call Waiting tone, and
with the touch of a button, you can put your first call
on hold and answer the second one. You can also put
your current voice call on hold and make a new voice
call to someone else.
z
To use Call Waiting, set “Arrival Call Act” (p.401) to
“Answer” beforehand. If another setting is selected,
you will not be able to answer a voice call received
during another voice call even when Call Waiting is
active.
z
You can answer another call when you receive a
videophone call during a voice call or when you
receive a voice call or videophone call during a
videophone call if you activate Call Waiting and set
“Arrival Call Act” to “Answer”. In this case, you have
to end the current voice call or videophone call (You
cannot put the current call on hold).
→ p.401
Using Call Waiting
1
i
X
“Settings/NW Service”
X
“Network service”
X
“Call Waiting”
X
Select any item:
Activate, Deactivate, Check setting
Putting the current voice call on hold
to answer a new voice call
1
When you hear a double-beep,
press
r
Your first call is automatically put on hold and the
new voice call is answered.
2 Return to the first caller
■
To end the call with the second caller
X
y
X
r
The call with the second caller ends, and the first
call restarts.
■ To put the second caller on hold
X
r
The call with the second caller is put on hold,
and the first call restarts.
You can switch back and forth between the 2
calls by pressing
r
.
■
To end the voice call on hold
X
u
(FUNC)
X
“End held call”
N
z
If Voice Mail service is activated during Chara-
den, DTMF tone operation is not available.
Change to DTMF mode from the function menu.
→ p.54
<Check setting>
z
When checking the Number B setting for 2in1,
only the active or inactive information appears.
<Check messages>
z
If you have voice call/videophone recorded
messages at the Voice Mail center, “
” (voice
mail icon) and “ ” (“Voice Mail” desktop icon)
appear on the standby screen.
z
The number in the voice mail icon changes
according to the number of stored messages
“
”, “ ”, “ ” ... “ ” (10 or more messages).
The displayed number of recorded messages is
the number of new messages announced when
played. The number of stored messages is not
included.
z
You may not be able to use this function to check
for messages recorded after checking messages.
<Message notification>
z
When 2in1 is in A mode or B mode, the
notification tone does not sound when a message
is recorded for the unused number.
<Erase icon>
z
Clearing the icon does not delete the
corresponding recorded message. The voice mail
icon appears again when you check for
messages.
<Activate notice call>
z
Even if you set the SMS Rejection setting, the
history is reported.