Docomo N-09A, Instruction Manual

Page: 460 / 572

458
Appendix
/Troubleshooting
F
“Failed to Copy all”
●
The data could not be copied for some reason. Replace
with a new microSD card and retry.
“Failed to Copy this”
●
The data could not be copied for some reason. Replace
with a new microSD card and retry.
“Failed to read”
●
The data could not be copied for some reason. Replace
with a new microSD card and retry.
“Failed to retrieve channel information”
●
This message appears when you attempt to receive
data via communication and a data error or
communication error occurs.
“Format microSD for your phone”
●
The microSD card is not formatted, or another error
occurs. Format the microSD card again.
→ p.333
“Frame number of this page is not supported”
●
The number of frames that can be displayed on i-mode
Browser/Full Browser exceeds the maximum, and the
Internet webpage cannot be viewed.
“Function cannot operate any more”
●
Exit another function.
I
“i-
α
ppli stand-by display terminated due to
security error”
“Software terminated due to security error”
●
This message appears when you attempt to perform a
prohibited action and i-
α
ppli or i-
α
ppli standby screen
(including i-
α
ppli DX) exits. → pp.270, 279
““i-
α
ppli To” function is not set”
●
This message appears when you attempt to start
i-
α
ppli from sites, mail, infrared data exchange, Bar
code reader, IC card, ToruCa or data broadcast, but the
i-
α
ppli is not allowed to be linked and cannot start.
→ p.278
“Input error (205)”
●
This message appears after you enter text on i-mode
sites or Internet websites and send information. Press
d
to cancel the entered text or settings. (The settings/
content have been already sent, and transmission
cannot be canceled.)
“Insert UIM”
●
This message appears when a FOMA card (UIM) is not
properly inserted or may be damaged. Check if a
FOMA card (UIM) is properly inserted.
→
p.41
“Invalid address”
●
The address contains “,” and mail cannot be sent.
Delete “,”.
●
The sender’s mail address of received mail exceeds 50
single-byte characters, and mail cannot be replied to.
●
The address contains spaces or characters other than
numbers, “#” and “
*
”, and SMS cannot be sent. Delete
spaces or characters other than numbers, “#” and “
*
”.
“Invalid UIM Auto-start failed”
●
This message appears when you attempt to auto-start
i-
α
ppli restricted by the FOMA card security function.
→ p.41
“Invalid UIM Requested service not available”
●
This message appears when you select the desktop
icon or desktop info of data protected by the FOMA
card security function.
→ p.41
●
This message appears when you select a screen
memo or MessageR/F protected by the FOMA card
security function.
→ p.41
“Invalid UIM Requested software failed to start”
●
This message appears when you attempt to start
i-
α
ppli restricted by the FOMA card security function.
→ p.41
“Invalid URL”
●
This message appears when a URL entered in “Enter
URL” or “Home URL” does not start with “http://” or
“https://”, or when “OK” is selected without any text
entered. Re-enter URL.
→
pp.183, 189, 198
M
“Memory full Cannot move”
●
This message appears when you attempt to save data
to or take data out from the Secret folder but the
destination folder is full. Delete data from the
destination folder, then move the data.
→ pp.129, 130
“Memory No.:XXX Cannot overwrite”
●
This message appears when Secret mode or Secret
data only mode is not active and you attempt to add a
phonebook entry to the same No. as secret data
memory No.
→
p.127
“Memory shortage”
●
This message appears when you cannot operate any
more due to memory shortage. If the message often
appears, reboot the power.
“Memory shortage Quit”
●
Memory shortage occurs. The operation is interrupted.
When composing i-mode mail, you may not be able to
enter up to 5,000 double-byte characters depending on
the number of active tasks or combination of fonts.
“Message too long to add header”
●
The total size of the main text and header exceeds
5,000 double-byte characters, and the header cannot
be added.