Docomo N-09A, Instruction Manual

Page: 102 / 572

100
Sound/Screen/
Light Settings
Setting Sound Effect for Ring
Tones and Melodies
<Stereo&3D sound>
Get rich and exciting sounds of melodies, ring tones
for voice/videophone/PushTalk call or mail, sound
effects and i-motion sound when a stereo earphone
set (optional) is connected.
1
i
X
“Settings/NW Service”
X
“Incoming call”
X
“Stereo&3D
sound”
X
“ON”
■ Not to set Stereo&3D sound
X
“OFF”
● What is 3D sound?
The 3D sound function uses the stereo earphones set
to produce 3-dimensional and resonating sound. This
function allows you to enjoy i-
α
ppli games and
melody playback with richer and more realistic sound.
• The 3D effect may vary depending on the
individual. If the 3D sound bothers you, set
“Stereo&3D sound” to “OFF”.
● When playing i-motion with sound effects
When you play i-motion with sound effects, the effects
simultaneously enhance the sound played through
the speaker and earphone. Stereo sound played
through earphones is enhanced by effects that
provide a natural-sounding 3D sound field and rich
low tones as well as clearly defined voice and music
audio.
z
i-motion with sound effects can be identified by icon
shown on the movie list screen.
→
p.305
Informing You of Incoming
Calls by Vibration
<Vibrator>
Set vibration patterns to notify you when you receive
a Voice call, Videophone, PushTalk or Mail.
1
i
X
“Settings/NW Service”
X
“Incoming call”
X
“Vibrator”
X
Select an item to set vibrator
When “Phone” is selected, the vibrator for voice
calls and 64K data communications is set.
When “Mail” is selected, the vibrator for i-mode
mail, SMS and packet communications is set.
2
Select the vibration pattern:
Pattern 1 - Pattern 3 …… Vibrate in each
pattern. When you move the highlight while
selecting an item, the FOMA terminal vibrates in
the highlighted pattern.
Melody linkage …… Vibrate in a pattern linked
to melody set as a ring tone.
OFF …… Do not vibrate.
■ Icons on the standby screen while setting the
vibration pattern
: Vibrate when receiving a voice call, videophone
call or PushTalk
: Vibrate when receiving mail or MessageR/F
: Both “
” and “ ” are set
N
z
Even when set to “ON”, sound effects do not work
for sounds coming from the built-in speaker.
z
When “Headset usage setting” is set to
“speaker” and ring tones/melody alarm
sounds are played with a stereo earphone set
connected, the “Stereo&3D sound” setting is
disabled. When set to “Headset only”, the
“Stereo&3D sound” setting is enabled.
N
z
Take care not to bring the FOMA terminal close to
fire (e.g. space heater) or drop it off a table due to
vibration.
z
Even when “Melody linkage” is selected, the
FOMA terminal does not always vibrate to the
melody. When no vibration pattern is set for the
melody or when i-motion or Chaku-Uta-Full
®
is set
as a ring tone, the FOMA terminal vibrates in
Pattern 2.
z
When receiving Area Mail, Vibrator links to the
ring tone or beep regardless of this setting.
Vibrator does not work when Area Mail arrives but
“Mail” vibration pattern is set to “OFF”.
<Vibrator priority>
z
When the vibrator settings are duplicated, the
priority is assigned as follows:
①
Vibrator for Ring tone/Image (individual)
② Vibrator for Ring tone/Image (group)
③ Vibrator for B mode of 2in1
④
Vibrator setting