Docomo N-09A, Instruction Manual

Page: 133 / 572

131 Continued on next page
Se
curity Settings
Activating Original lock
1
i
X
“Settings/NW Service”
X
“Lock/Security”
X
“Lock”
X
Enter
your security code
2
Select Original lock from (High) to
(Low)
The lock is activated and the function or data is
locked.
“
” appears on the screen.
Icons displayed when another lock is set at the
same time
→ p.25
■ To customize functions or data to be
locked
→
p.131
■ To edit the title
X
Highlight Original lock from (High) to (Low)
X
u
(FUNC)
X
“Edit title”
X
Enter a title
■ To release Original lock
X
“OFF”
● Operations when Original lock is set
If you try to use the locked function or data when
Original lock is set, you are asked to enter the
security code.
z
After you enter the correct security code, the lock is
deactivated temporarily and you can use the locked
function or data (functions of “Dial/sending mail”
and “Incoming/Mail disp.” are not available when
the lock is released temporarily). After exiting the
active function and returning to the standby screen,
the lock is activated again.
<Example: To view an i-mode mail when Original lock
is set>
1 On the standby screen
X
o
2 Enter your security code
Original lock is released temporarily and the mail
menu appears.
3 Read i-mode mail
4
Exit the mail menu and return to
the standby screen
Original lock is activated and “ ” appears on
the screen.
Customizing functions or data to be
locked
z
You can store particular settings such as locking
only the phonebook or restricting only the outgoing
calls/mail to Original lock (High), (Mid.), or (Low)
depending on the usage or purpose.
z
You can set (customize) items to be locked by
category, group or function as shown in
Table 1
(p.132).
1
Lock selection screen (p.131)
X
Highlight Original lock (High) to
(Low)
X
o
(Detail)
“ ” appears when any of
the items in the category is to
be locked and “
” appears
when all items are to be
locked.
• “Select”/“Release” or
“Select all”/“Release all” can be selected from
u
(FUNC).
2 Select a category where you want
to change the setting
“ ” appears when any of
the items in the group is to be
locked and “
” appears
when all items are to be
locked.
• “Select”/“Release” or
“Select all”/“Release all”
can be selected from
u
(FUNC).
3 Select a group where you want to
change the setting
4 Use
c
to select a checkbox ( □ )
X
o
(Finish)
The checked ( ) items will
be locked.
Deselect items you do not
want to lock.
• “Select all”/“Release all”
can be selected from
u
(FUNC).
5
o
(Finish)
X
o
(Finish)
X
d
(Set)
The number of times you press
o
(Finish)
varies depending on the category.
Lock selection
Category list
Group list
Function list