Docomo N-09A, Instruction Manual

Page: 526 / 572

9
Setting the PC
Installing the FOMA communication setting file (drivers)
d
When installing FOMA communication setting file, be sure to log on as Administrator. If you attempt to
install the file with another account, an error may occur. Contact your PC's manufacturer or Microsoft
for information on how to set Administrator privileges on your PC.
d
You can download the FOMA communication setting file from the DOCOMO website.
d Install the FOMA communication setting file only when connecting to the PC using the FOMA USB
Cable with Charge Function 02.
1
Start up Windows and insert the
"CD-ROM for N-09A" in the CD-
ROM drive of your PC
This screen will automatically appear.
2
Click " データリンクソフト・各種設定ソフト " (Setup software)
3
Click " インストール " (Install) of "FOMA 通信設定ファイル（ USB ドライバ） "
(FOMA communication setting file (USB driver))
4
Double-click "FOMAinst.exe" in the appeared folder, and click " 続行 "
(Continue)
It is displayed as "FOMAinst" depending on the setting of your PC.
For Windows XP and Windows 2000, you need not click "
続行
" (Continue).
5
Upon confirming the software license agreement, click "
同意する
" (Agree) to
agree to it
If you click " 同意しない " (Not agree), the installation is canceled.
6
Turn on the FOMA terminal and then connect the FOMA USB Cable with
Charge Function 02 (optional) to your FOMA terminal
7
After the message requesting to connect the FOMA terminal to PC appears,
connect the FOMA USB Cable with Charge Function 02 to the USB terminal
of your PC
Installing the drivers automatically starts.
After drivers are successfully installed, DOCOMO Connection Manager can be installed successively. To
install DOCOMO Connection Manager, click "
インストールする " (Install). → p.16