Docomo N-09A, Instruction Manual

Page: 408 / 572

406
Network Serv
ices
Using 2in1
Set 2in1 to ON and configure settings.
1
i
X
“Settings/NW Service”
X
“Network service”
X
“2in1 setting”
X
Enter your security code
X
“YES”
X
Select any item:
■ When 2in1 is set to ON
After entering your security code, the 2in1
setting screen appears instead of a screen
asking whether to set 2in1 to ON.
Mode switching
……
Select A mode/B mode/
Dual mode. “Modes” → p.403
Phonebook 2in1 setting
……
Set “Phonebook
2in1 setting”/“Group 2in1 setting” for the
phonebook to appear following the mode setting
when in 2in1. Highlight a phonebook entry or
group and press
d
(Switch) to select a mode,
then press
o
(Finish). Each time you press
d
(Switch), the mode switches as follows:
→ → Searching the phonebook
→
p.90
Stand-by display …… Set the standby screen
displayed in B mode or Dual mode respectively.
→
p.107
“ ★ ” appears for the changed item. Press
o
(Reset) to reset the setting to default.
Set call/receive No.
Disp. call/receive No.
……
Change font
color to distinguish between “Number A
(Address A)” and “Number B (B address)”
(name, phone number, mail address, etc.)
when making/receiving a call. Press
o
(Switch) to switch the pallet colors (16
colors or 256 colors). Press
p
(Reset) to
reset the setting to default.
Ringtone for Number B …… Set incoming
operations for Number B. In “Voice call
(recv.)” or “V.phone (recv.)”, the following
① Ring tone, ② Image, ③ Illumination,
④ Vibrator and ⑤ Answer message can be
set. In “Mail (recv.)”, the following
①
Ring
tone,
③
Illumination and
④
Vibrator can be
set:
Voice call (recv.), V.phone (recv.),
Mail (recv.)
……
① Ring tone: Go to Step 2 in “Select
ring tone” (p.98)
②
Image: Go to “To set the calling/
receiving display” under Step 2 in
“Select ring tone” (p.98)
③ Illumination: Go to Step 1 in
“Illumination” (p.111)
④ Vibrator: Go to Step 2 in “Vibrator”
(p.100)
⑤ Answer message: Go to the step
performed after selecting “ON”
under Step 1 in “Record message”
(p.71)
2in1 function OFF
Rcv. avoid. setting
……
Restrict incoming calls
for Number A and Number B.
Change rcv. avoid.
……
Set the Rcv. avoid.
setting for Number A and Number B.
Check rcv. avoid.
Mode link …… Link the 2in1 Mode
switching to Rcv. avoid. setting. Number A
incoming call is accepted in A mode,
Number B incoming call in B mode, and
both calls in Dual mode.
*When the function is active, the mode cannot
be switched with “ ” displayed.
Rcv. avoid. (abroad) …… Set the Rcv.
avoid. setting overseas (disabled when
Mode link is active).
N
z
When 2in1 is set to OFF, you can also configure
“2in1 setting” by pressing
2
for 1 second or
longer on the standby screen.
<Mode switching>
z
You can also switch modes by pressing
2
for 1
second or longer on the standby screen.
<Phonebook 2in1 setting>
z
Phonebook entries in “B” setting cannot be added
to the PushTalk phonebook.
z
When entries in the PushTalk phonebook are set
to “B”, a confirmation screen appears indicating
that PushTalk calls cannot be made.
z
You cannot set this function for UIM phonebook
entries.
z
Select “Display detail” from the function menu to
open the Phonebook detail screen from the
Phonebook list screen.