Docomo N-09A, Instruction Manual

Page: 50 / 572

48
Before Using the
Handset
■ Pre-stored mail
“Welcome ドコモ動画 ” (Welcome mail)
and “
緊急速報「エリアメール」のご案内
”
(Guide to Early Warning “Area Mail”) are stored
at the time of purchase.
→ p.163
Turning the power off
1
y
(2 seconds or longer)
The shutdown screen “SEE YOU” appears and
the power is turned off.
Switching Between Japanese
and English
<Select language>
Switch the display language from Japanese (default)
to English.
1
i
X
“
設定／ NW サービス
”
X
“
ディ
スプレイ ”
X
“ バイリンガル ”
X
“English”
■
To change from English to Japanese
X i X
“Settings/NW Service”
X
“Display”
X
“Select language”
X
“ 日本語 ”
Configuring Default Setting
<Initial setting>
After turning the power on, configure initial settings of
“Set main time”, “Change security code”, “Character
size”, “Permit to send loc.” and “Keypad sound”.
1 Initial setting screen
X
“YES”
2 Set the main time → p.49
3 Change the security code
→
p.125
The default setting is “0000” (4 zeros).
4 Set the character size → p.115
5 Set whether to send location
information via the GPS function
→ p.295
If “Permit to send loc.” is set to “ON”, enter your
security code.
N
z
The wake-up tone can be set to “ON” or “OFF”
from the function menu of “Wake-up display”
under “Display setting”.
→ p.107
z
You cannot change the Wake-up tone melody. The
volume is determined by “Phone” under “Ring
volume” (Played at “Level 2” when set to “Step”).
Press any key to stop melody.
z
When you change the FOMA card (UIM), you
have to enter the 4- to 8-digit security code after
turning on the power. The standby screen appears
when the security code is successfully entered. If
you enter a wrong security code 5 times, the
power turns off (you can turn on the power again).
z
If the battery ran out or the Auto power OFF
function worked to turn off the power last time, the
notification screen appears when you turn on the
power again.
z
After powering off, wait a while before powering
back on.
N
z
When a FOMA card (UIM) is inserted, the Select
language setting is saved to the FOMA card
(UIM).
z
When “Select language” is set to “English”, “ON”
and “OFF” will be the options for “Display” under
“Clock display” and for “Info notice setting”.
English announcement is available for some
services.
→
p.400
Initial setting