Dell PowerConnect 3500 Series Cli Reference Manual Download Page 76

Page: 76 / 538

Command Modes

SP (SSH Public Key) Mode

UE (User EXEC) Mode

show snmp filters

Displays the configuration of SNMP filters.

show snmp groups

Displays the configuration of SNMP groups.

show snmp users

Displays the configuration of SNMP users.

show snmp views

Displays the configuration of SNMP views.

show sntp configuration

Shows the configuration of the Simple Network Time Protocol (SNTP).

show sntp status

Shows the status of the Simple Network Time Protocol (SNTP).

show spanning-tree

Displays Spanning Tree configuration.

show startup-config

Displays the startup configuration file contents.

show syslog-servers

Displays the syslog servers settings.

show tacacs

Displays configuration and statistics for a servers.

show users accounts

Displays information about the local user database.

show users login-history

Displays information about the login history of users.

show vlan

Displays VLAN information.

show vlan internal usage

Displays a list of VLANs used internally by the device.

show vlan mac-to-vlan

Displays the MAC-to-VLAN database.

show vlan protocols-groups

Displays protocols-groups information.

stack reload

Reloads stack members.

test copper-port tdr

Diagnoses with TDR (Time Domain Reflectometry) technology the
quality and characteristics of a copper cable attached to a port.

Command Group

Description

key-string

Manually specifies a SSH public key.

user-key

Specifies which SSH public key is manually configured and enters the
SSH public key-string configuration command.

Command Group

Description

enable

Enters the Privileged EXEC mode.

exit

Closes an active terminal session by logging off the device.

Changes a login username.

book.book Page 76 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands