manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 308

308

QoS Commands

Default Configuration

Default CoS value of a port is 0.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode.

User Guidelines

•

If the port is trusted, the default CoS value of the port is used to assign a CoS value to all untagged 
packets entering the port. 

Example

The following example configures port 1/e15 default CoS value to 3.

show qos map

The show qos map User EXEC mode command displays all QoS maps.

Syntax

•

show qos map 

[

dscp-queue

] 

•

dscp-queue

 — Indicates the DSCP to queue map.

Default Configuration

This command has no default configuration.

Command Mode

User EXEC mode.

User Guidelines

There are no user guidelines for this command.

Console(config)# 

interface ethernet

 1/e15

Console(config-if) 

qos cos

 3

book.book  Page 308  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands