manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 146

146

Configuration and Image Files

more

The 

more

 Privileged EXEC mode command displays a file.

Syntax

•

more 

url

•

url

 — The location URL or reserved keyword of the file to be displayed. (Range: 1 - 160 characters)

The following table displays keywords and URL prefixes:

Default Configuration

This command has no default configuration.

Command Mode

Privileged

 

EXEC mode.

User Guidelines

•

Files are displayed in ASCII format, except for image files, which are displayed in hexadecimal format.

•

*.prv and *.sys files cannot be displayed.

sshkeys.prv

--

262144

01-Jun-2003

01:01:05

syslog1.sys

r-

262144

01-Jun-2003

02:22:48

syslog2.sys

r-

262144

01-Jun-2003

02:22:48

directry.prv

--

262144

01-Jun-2003

01:01:02

startup-config

rw

1523

08-Feb-2005

09:02:31

Total size of flash: 15597568 bytes

Free size of flash: 5759287 bytes

Keyword

Source or Destination

flash:

Source or destination URL for flash memory. It is the default in case a URL is 
specified without a prefix.

running-config

Represents the current running configuration file.

startup-config

Represents the startup configuration file.

book.book  Page 146  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands