manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 515

802.1x Commands

515

802.1x Commands

aaa authentication dot1x 

The

 aaa authentication dot1x 

Global Configuration mode command specifies one or more 

authentication, authorization, and accounting (AAA) methods for use on interfaces running IEEE 
802.1X. Use the 

no

 form of this command to return to the default configuration.

Syntax

•

aaa authentication dot1x default

 

method1

 [

method2

...] 

•

no aaa authentication dot1x default

•

method1

 [

method2

...] — At least one from the following table:

Default Configuration

No authentication method is defined.

Command Mode 

Global Configuration mode.

User Guidelines 

•

Additional methods of authentication are used only if the previous method returns an error and 
not if the request for authentication is denied. To ensure that authentication succeeds even if all 
methods return an error, specify 

none

 as the final method in the command line.

•

The RADIUS server must support MD-5 challenge and EAP type frames.

•

The device accepts EAP frames with a priority tag and also accepts EAP packets with VLAN tags.

Keyword 

Description

Radius

Uses the list of all RADIUS servers for 
authentication

None

Uses no authentication

book.book  Page 515  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands