manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 518

518

802.1x Commands

Default Configuration

Periodic re-authentication is disabled.

Command Mode 

Interface Configuration (Ethernet) mode.

User Guidelines

There are no user guidelines for this command.

Examples

The following example enables periodic re-authentication of the client.

dot1x timeout re-authperiod

The 

dot1x timeout re-authperiod

 Interface Configuration mode command sets the number of seconds 

between re-authentication attempts. Use the 

no

 form of this command to return to the default 

configuration.

Syntax

•

dot1x timeout re-authperiod 

seconds

 

•

no dot1x timeout re-authperiod

•

seconds — 

Number of seconds between re-authentication attempts. (Range: 300 - 4294967295)

Default Configuration

Re-authentication period is 3600 seconds.

Command Mode 

Interface Configuration (Ethernet) mode.

User Guidelines

There are no user guidelines for this command.

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

dot1x re-authentication

book.book  Page 518  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands