Dell PowerConnect 3500 Series Cli Reference Manual Download Page 292

Page: 292 / 538

292

Port Channel Commands

Syntax

•

interface range port-channel

{

port-channel-range

all

}

•

port-channel-range

— List of valid port-channels to add. Separate non-consecutive port-channels

with a comma and no spaces. A hyphen designates a range of port-channels.

•

all

— All valid port-channels.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

Commands under the interface range context are executed independently on each interface in the
range.

Example

The following example groups port-channels 1, 2 and 6 to receive the same command.

channel-group

The

channel-group

Interface Configuration (Ethernet) mode command associates a port with a port-

channel. Use the

form of this command to remove a port from a port-channel.

Syntax

•

channel-group

port-channel-number

mode

{

auto

}

•

no channel-group

•

port-channel_number

— Specifies the number of the valid port-channel for the current port to

join.

•

— Forces the port to join a channel without an LACP operation.

•

auto

— Allows the port to join a channel as a result of an LACP operation.

Default Configuration

The port is not assigned to a port-channel.

Command Mode

Interface Configuration (Ethernet) mode.

Console(config)#

interface range port-channel

1-2,6

book.book Page 292 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands