manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 339

SNMP Commands

339

Syntax

•

snmp-server group 

groupname

 {

v1 | v2 | v3 {noauth | auth | priv} [notify

 

notifyview

 ] } [

read

 

readview

] [

write

writeview

] 

•

no snmp-server group 

groupname

 [

v1 | v2 | v3 [noauth | auth | priv]] [context 

name

]

•

groupname 

— The name of the group. (Range: Up to 30 characters)

•

v1 

— SNMP

 

Version 1 security model. 

•

v2 

— SNMP

 

Version 2 security model.

•

v3 

— SNMP

 

Version 3 security model.

•

noauth 

— Specifies no authentication of a packet. Applicable only to SNMP

 

Version 3 security 

model.

•

auth

— Specifies authentication of a packet without encrypting it. Applicable only to SNMP

 

Version 3 security model.

•

priv 

—Specifies authentication of a packet with encryption. Applicable only to SNMP

 

Version 3 

security model.

•

read

 

readview 

— A

 

string that is the name of the view that enables you only to view the contents of 

the agent. If unspecified, all the objects except of the community-table and SNMPv3 user and 
access tables are available. (Range: Up to 30 characters)

•

write 

writeview 

— A string that is the name of the view that enables you to enter data and 

configure the contents of the agent. If unspecified, nothing is defined for the write view. (Range: 
Up to 30 characters)

•

notify

 

notifyview 

— A string that is the name of the view that enables you to specify an inform or a 

trap. If unspecified, nothing is defined for the notify view. (Range: Up to 30 characters.)

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode.

User Guidelines

The index of the group name table is comprised of Group Name, Security Model, and Security Level. 
Different views for the same group can be defined with different security levels. For example, after 
having created the appropriate views, a group can be created for which "no authentication" is required, 
while allowing only notification view for

 "

interfaces". A group of the same name can be created for which 

"priv" authentication is required. Read views can, for example, be configured for this group for mib2, and 
write views for interfaces. In this case, users in this group who send "priv" packets can modify all 
"interfaces" MIBs and view all mib2.

book.book  Page 339  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands