manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 401

Syslog Commands

401

Syslog Commands

logging on

The 

logging on

 Global Configuration mode command controls error message logging. 

This command sends debug or error messages to a logging process, which logs messages to 
designated locations asynchronously to the process that generated the messages. Use the 

no

 form of 

this command to disable the logging process. 

Syntax

•

logging  on

•

no logging on

Default Configuration

Logging is enabled.

Command Mode

Global Configuration mode.

User Guidelines

The logging process controls the distribution of logging messages at various destinations, such as the 
logging buffer, logging file or syslog server. Logging on and off at these destinations can be 
individually configured using the 

logging buffered

, 

logging file

, and 

logging

 Global Configuration 

mode commands. However, if the

 logging on

 command is disabled, no messages are sent to these 

destinations. Only the console receives messages.

Example

The following example enables logging error messages.

logging

The 

logging 

Global Configuration mode command logs messages to a syslog server.. Use the 

no

 form 

of this command to delete the syslog server with the specified address from the list of syslogs.

Console(config)# 

logging on

book.book  Page 401  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands