manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 447

TIC Commands

447

Example

The following example reactivates a suspended user with username 

bob

.

set line active

The 

set line active 

Privileged EXEC mode command reactivates a locked line.

Syntax

•

set line {console | telnet | ssh} active

•

console

 — Console terminal line.

•

telnet

 — Virtual terminal for remote console access (Telnet).

•

ssh

 — Virtual terminal for secured remote console access (SSH).

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example reactivates the line for a virtual terminal for remote console access.

set enable-password active

The 

set enable-password active 

Privileged EXEC mode command reactivates a locked enable password.

Syntax

•

set enable-password 

level 

active

•

level

 — The user level. (Range: 1 - 15) 

Default Configuration

This command has no default configuration.

Console# 

set username

 bob 

active

Console# 

set line telnet active

book.book  Page 447  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands