manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 350

350

SNMP Commands

Syntax

•

snmp-server set

 

variable-name name1 value1 

[

 name2 value2 …

]

•

variable-name

 — MIB variable name.

•

name value

 — List of name and value pairs. In the case of scalar MIBs, only a single pair of name 

values. In the case of an entry in a table, at least one pair of name and value followed by one or 
more fields.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

Although the CLI can set any required configuration, there might be a situation where a SNMP user 
sets a MIB variable that does not have an equivalent command. In order to generate configuration files 
that support those situations, the 

snmp-server set 

command is used.

•

This

 command is case-sensitive.

Examples

The following example configures the scalar MIB sysName with the value 

dell

.

show snmp

The 

show snmp 

Privileged EXEC mode command displays the SNMP status.

Syntax

•

show  snmp

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode.

User Guidelines

There are no user guidelines for this command.

Console(config)# 

snmp-server set

 sysName sysname dell

book.book  Page 350  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands