manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 111

Address Table Commands

111

Default Configuration 

The default setting is 1 address.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

This command is only relevant in dynamic learning modes.

Example

The following example sets the maximum number of addresses that are learned on port 1/e7 before it is 
locked to 20.

port security routed secure-address

The 

port security routed secure-address 

Interface Configuration (Ethernet, port-channel) mode 

command adds a MAC-layer secure address to a routed port. Use the 

no 

form of this command to delete 

a MAC address.

Syntax

•

port security routed secure-address 

mac-address

•

no port security routed secure-address 

mac-address

•

mac-address

 — A valid MAC address.

Default Configuration 

No addresses are defined.

Command Mode

Interface configuration (Ethernet, port-channel) mode; cannot be configured for a range of interfaces 
(range context).

Console(config)# 

interface ethernet

 1/e7

Console(config-if)# 

port security mode dynamic

Console(config-if)# 

port security max

 20

book.book  Page 111  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands