manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 360

360

Spanning-Tree Commands

spanning-tree max-age

The 

spanning-tree max-age 

Global Configuration mode command configures the Spanning Tree bridge 

maximum age. Use the 

no

 form of this command to return to the default configuration.

Syntax

•

spanning-tree max-age 

seconds

•

no spanning-tree max-age

•

seconds 

— Time in seconds. (Range: 6 - 40)

Default Configuration

The default maximum age for IEEE Spanning Tree Protocol (STP) is 20 seconds.

Command Mode

Global Configuration mode.

User Guidelines

When configuring the maximum age, the following relationships should be kept:

–

2*(Forward-Time - 1) >= Max-Age

–

Max-Age >= 2*(Hello-Time + 1)

Example

The following example configures the Spanning Tree bridge maximum-age to 10 seconds.

spanning-tree priority

The 

spanning-tree priority 

Global Configuration mode command configures the Spanning Tree priority 

of the device. The priority value is used to determine which bridge is elected as the root bridge. Use the 

no

 form of this command to return to the default configuration.

Syntax

•

spanning-tree priority 

priority

•

no spanning-tree priority

•

priority

 — Priority of the bridge. (Range: 0 - 61440 in steps of 4096)

Default Configuration

The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.

Console(config)# 

spanning-tree max-age

 10

book.book  Page 360  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands