manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 209

IP Addressing Commands

209

Default Configuration

No name server addresses are specified.

Command Mode 

Global Configuration mode.

User Guidelines

•

The preference of the servers is determined by the order in which they were entered. 

•

Up to 8 servers can be defined using one command or using multiple commands.

Examples

The following example sets the available name server.

ip host

The 

ip host 

Global Configuration mode command defines static host name-to-address mapping in the 

host cache. Use the 

no

 form of this command to

 

remove the host name-to-address mapping.

Syntax

•

ip host 

name address

•

no ip host 

name

•

name — 

Name of the host (Range: 1 - 158 characters)

•

address — 

Associated IP address. 

Default Configuration 

No host is defined.

Command Mode 

Global Configuration mode.

User Guidelines

•

Up to 64 host name-to address mapping entries are permitted in the host cache.

Examples

The following example defines a static host name-to-address mapping in the host cache. 

Console(config)# 

ip name-server 

176.16.1.18

Console(config)# 

ip host 

accounting.dell.com 176.10.23.1

book.book  Page 209  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands