manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 156

156

DHCP Snooping

Syntax

•

ip dhcp snooping verify

•

no ip dhcp snooping verify

Default Configuration

The default configuration is that the switch verifies the source MAC address in a DHCP packet that is 
received on untrusted ports matches the client hardware address in the packet.

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example configures a switch to verify on an untrusted port that the source MAC address in 
a DHCP packet matches the client hardware address.

ip dhcp snooping database

The 

ip dhcp snooping database

 Global Configuration mode command configures the DHCP snooping 

binding file. Use the 

no

 form of this command to delete the binding file.

Syntax

•

ip dhcp snooping database

•

no ip dhcp snooping database

Default Configuration

The URL is not defined.

Command Mode

Global Configuration mode.

User Guidelines

•

To ensure that the lease time in the database is accurate, Simple Network Time Protocol (SNTP) is 
enabled and configured.

•

The switch writes binding changes to the binding file only when the switch system clock is 
synchronized with SNTP.

console(config)#

ip dhcp snooping verify

book.book  Page 156  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands