manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 154

154

DHCP Snooping

Syntax

•

ip dhcp snooping vlan

 

vlan-id

•

no ip dhcp snooping vlan 

vlan-id

•

vlan-id

 

— Specifies the VLAN ID.

Default Configuration

The default configuration is disabled.

Command Mode

Global Configuration mode.

User Guidelines

•

You must first globally enable DHCP snooping before enabling DHCP snooping on a VLAN.

Example

The following example enables DHCP snooping on VLAN 1000:

ip dhcp snooping trust

The 

ip dhcp snooping trust

 Interface Configuration (Ethernet, Port-channel) mode command 

configures a port as trusted for DHCP snooping purposes. Use the 

no

 form of this command to return to 

the default settings.

Syntax

•

ip dhcp snooping trust

•

no ip dhcp snooping trust

Default Configuration

The default configuration is that the interface is not trusted.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode.

User Guidelines

•

Configure as trusted ports those that are connected to a DHCP server or to other switches or routers. 
Configure as untrusted ports those that are connected to DHCP clients.

console(config)# 

ip dhcp snooping vlan 1000

book.book  Page 154  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands