manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 528

528

802.1x Commands

Example

The following example displays 802.1X users.

The following table describes significant fields shown above:

show dot1x statistics

The 

show dot1x statistics 

Privileged EXEC mode command displays 802.1X statistics for the specified 

interface.

Syntax

•

show dot1x statistics ethernet 

interface

•

interface

 — Valid Ethernet port. (Full syntax: 

unit/port

)

Default Configuration

This command has no default configuration.

Console# 

show

 

dot1x users

Port

Username

Session Time

Auth Method

 MAC Address

-----

--------

------------

-----------

--------------

1/e1

Bob

1d:03:08.58

Remote

0008:3b79:8787

1/e2

John

08:19:17

None

0008:3b89:3127

Console# 

show

 

dot1x users username 

Bob

Username: Bob

Port

Username

Session Time

Auth Method

 MAC Address

-----

--------

------------

-----------

--------------

1/e1

Bob

1d:03:08.58

Remote

0008:3b79:8787

Field

Description

Port

The port number.

Username

The username representing the identity of the Supplicant.

Session Time

The period of time the Supplicant is connected to the system.

Authentication Method

Authentication method used by the Supplicant to open the session.

MAC Address

MAC address of the Supplicant.

book.book  Page 528  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands