manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 371

Spanning-Tree Commands

371

User Guidelines

All VLANs that are not explicitly mapped to an MST instance are mapped to the common and internal 
Spanning Tree (CIST) instance (instance 0) and cannot be unmapped from the CIST.

For two or more devices to be in the same MST region, they must have the same VLAN mapping, the 
same configuration revision number, and the same name.

Example

The following example maps VLANs 10-20 to MST instance 1.

name (mst)

The 

name 

MST Configuration mode command defines the MST region name. Use the 

no

 form of this 

command to return to the default setting.

Syntax

•

name 

string

•

no name

•

string — 

MST configuration name. Case-sensitive. (Range: 1 - 32 characters)

Default Configuration

The default name is a bridge ID.

Command Mode

MST Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example defines the configuration name as region1. 

Console(config)# 

spanning-tree mst configuration

Console(config-mst)# 

instance 1 add vlan 10-20

Console(config)# 

spanning-tree mst configuration

Console(config-mst)# 

name

 region 1

book.book  Page 371  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands