manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 253

LLDP Commands

253

Default Configuration

Default — 30 seconds.

User Guidelines

There are no user guidelines for this command.

Examples

The following example specifies how often the software sends Link Layer Discovery Protocol (LLDP) 
updates.

lldp hold-multiplier

The

 lldp hold-multiplier

 Global Configuration mode command specifies the amount of time the 

receiving device holds a Link Layer Discovery Protocol (LLDP) packet before discarding it. Use the 

no

 

form of this command to revert to the default setting. 

Syntax

•

lldp hold-multiplier

 

number

 

•

no

 

lldp hold-multiplier

•

number

 —

 

Specifies the hold time to be sent in the LLDP update packets as a multiple of the 

timer value. (Range: 2-10) 

Default Configuration

The default configuration is 4. 

Command Modes 

Global Configuration mode.

User Guidelines

•

The actual time-to-live value used in LLDP frames can be expressed by the following formula: TTL = 
min(65535, LLDP-Timer * LLDP-HoldMultiplier). For example, if the value of LLDP timer is '30', and 
the value of the LLDP hold multiplier is '4', then the value '120' is encoded in the TTL field in the 
LLDP header.

Console (config) # 

lldp timer

book.book  Page 253  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands