manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 314

314

RADIUS Commands

radius-server source-ip

The 

radius-server source-ip

 Global Configuration mode command specifies the source IP address used 

for communication with RADIUS servers. Use the 

no

 form of this command to return to the default 

configuration.

Syntax

•

radius-server source-ip

 

source

•

no radius-source-ip 

source

•

source

 — Specifies a valid source IP address.

Default Configuration

The source IP address is the IP address of the outgoing IP interface.

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the source IP address used for communication with RADIUS servers 
to 10.1.1.1.

radius-server source-ipv6

The 

radius-server source-ipv6

 Global Configuration mode command specifies the source IPv6 address 

used for the IPv6 communication with RADIUS servers. Use the 

no

 form of this command to return to 

the default.

Syntax

•

radius-server source-ipv6

 

source

•

no radius-server source-ipv6 

source

•

source

 — Specifies the source IPv6 address.

console(config)# 

radius-server source-ip

 10.1.1.1

book.book  Page 314  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands