manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 271

Login Banner

271

banner motd

The 

banner motd

 Global Configuration mode command specifies and enables a message-of-the-day 

banner. Use the 

no

 form of this command to delete the existing MOTD banner.

Syntax

•

banner motd

d message d

•

no banner motd

•

d 

— Delimiting character, for example a pound sign (#). A delimiting character cannot be used in 

the banner message.

•

message

 — Message text. The message must start in a new line and can be a multi-line message. 

Tokens in the form $(token) in the message text can be included. Tokens are replaced with the 
corresponding configuration variable. Tokens are described in the usage guidelines.

Default Configuration

Disabled (no MOTD banner is displayed).

Command Mode

Global Configuration mode.

User Guidelines

•

Follow this command with one or more blank spaces and a delimiting character. Then enter one or 
more lines of text, terminating the message with the second occurrence of the delimiting character.

•

When a user connects to a device, the message-of-the-day (MOTD) banner appears first, followed by 
the login banner and prompts. After the user logs in to the device, the EXEC banner is displayed.

book.book  Page 271  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands