manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 60

60

Command Groups

802.1x Commands

show crypto certificate 
mycertificate

 Displays the SSH certificates of the device.

Privileged EXEC

show ip http

Displays the HTTP server configuration.

Privileged EXEC

show ip https

Displays the HTTPS server configuration.

Privileged EXEC

Command Description

Access 

Mode

aaa authentication 
dot1x

Specifies one or more authentication, authorization, 
and accounting (AAA) methods for use on interfaces 
running IEEE 802.1x.

Global Configuration

dot1x system-auth-
control

Enables 802.1x globally.

Global Configuration

dot1x port-control

Enables manual control of the authorization state of 
the port

Interface Configuration

dot1x re-
authentication

Enables periodic re-authentication of the client.

Interface Configuration

dot1x timeout re-
authperiod

Sets the number of seconds between re-authentication 
attempts. 

Interface Configuration

dot1x re-
authentication

Manually initiates a re-authentication of all 802.1x-
enabled ports or the specified 802.1x-enabled port.

Interface Configuration

dot1x timeout quiet-
period

Sets the number of seconds that the device remains in 
the quiet state following a failed authentication 
exchange.

Interface Configuration

dot1x timeout tx-
period

Sets the number of seconds that the device waits for a 
response to an Extensible Authentication Protocol 
(EAP) - request/identity frame from the client, before 
resending the request.

Interface Configuration

dot1x max-req

Sets the maximum number of times that the device 
sends an EAP - request/identity frame to the client, 
before restarting the authentication process.

Interface Configuration

dot1x timeout supp-
timeout

Sets the time for the retransmission of an Extensible 
Authentication Protocol (EAP)-request frame to the 
client.

Interface Configuration

dot1x timeout server-
timeout

Sets the time for the retransmission of packets to the 
authentication server. 

Interface Configuration

show dot1x

Allows multiple hosts on an 802.1x-authorized port 
that has the 

dot1x port-control

 interface configuration 

command set to 

auto

. 

Privileged EXEC

book.book  Page 60  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands