Dell PowerConnect 3500 Series Cli Reference Manual Download Page 303

Page: 303 / 538

QoS Commands

303

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example maps CoS 7 to queue 2.

show qos interface

The

show qos interface

User EXEC mode command displays interface QoS information.

Syntax

•

show qos interface

[

queuing

shapers

rate-limit

] [

ethernet

interface-number

port-channel

number

]

•

queuing

— Displays the queue's strategy (WRR or EF) and the weight for WRR queues and the

CoS to queue map and the EF priority.

•

shapers

— Displays the shaper of the specified interface and the shaper for the queue on the

specified interface.

•

rate-limit

— Displays the rate-limit configuration.

•

ethernet

interface-number

— Valid Ethernet port number.

•

port-channel

number

— Valid port-channel number.

Default Configuration

There is no default configuration for this command.

Command Mode

User EXEC mode.

User Guidelines

•

If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted, etc.) is
displayed.

•

If no interface is specified, QoS information about all interfaces is displayed.

Console(config)#

wrr-queue cos-map

2 7

book.book Page 303 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands