manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 249

Management ACL

249

management access-class

The 

management access-class 

Global Configuration mode command restricts management connections 

by defining the active management access list. Use the 

no

 form of this command to disable this 

restriction. 

Syntax

•

management access-class 

{

console-only

 | 

name

}

•

no management access-class

•

name

 — Specifies the name of the access list to be used. (Range: 1-32 characters)

•

console-only

 — Indicates that the device can be managed only from the console.

Default Configuration

If no access list is specified, an empty access list is used.

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example configures an access list called mlist as the management access list.

show management access-list

The 

show management access-list 

Privileged EXEC mode command displays management access-lists.

Syntax

•

show management access-list 

[

name

]

•

name

 — Specifies the name of a management access list. (Range: 1 - 32 characters)

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode.

Console(config)# 

management access-class 

mlist

book.book  Page 249  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands