manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 238

238

Line Commands

speed

The 

speed

 Line Configuration mode command sets the line baud rate. 

Syntax

•

speed

 

bps

•

bps 

— Baud rate in bits per second (bps). Possible values are 2400, 4800, 9600, 19200, 38400, 

57600 and 115200.

Default Configuration

The default speed is 9600 bps.

Command Mode

Line Configuration (console) mode.

User Guidelines

•

This command is available only on the line console.

•

The configured speed is applied when Autobaud is disabled. This configuration applies only to the 
current session.

Examples

The following example configures the line baud rate to 115200.

autobaud

The 

autobaud

 Line Configuration mode command sets the line for automatic baud rate detection 

(autobaud). To disable automatic baud rate detection, use the 

no

 form of the command.

Syntax

•

autobaud

•

no autobaud

Default Configuration

Autobaud is disabled.

Command Mode

Line Configuration (console) mode.

Console(config)# 

line console

Console(config-line)# 

speed

 115200

book.book  Page 238  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands