manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 132

132

Clock

User Guidelines

•

Use the 

sntp client enable

 Interface Configuration mode command to enable the SNTP client on a 

specific interface.

Examples

The following example enables the SNTP Broadcast clients.

sntp anycast client enable

The 

sntp anycast client enable 

Global Configuration mode command enables SNTP Anycast client. Use 

the 

no

 form of this command to disable the SNTP Anycast client.

Syntax

•

sntp anycast client enable

•

no sntp anycast client enable

Default Configuration

The SNTP Anycast client is disabled.

Command Mode

Global Configuration mode.

User Guidelines

•

Polling time is determined by the 

sntp client poll timer

 Global Configuration mode command. 

•

Use the 

sntp client enable

 Interface Configuration mode command to enable the SNTP client on a 

specific interface.

Examples

The following example enables SNTP Anycast clients. 

sntp client enable

The

 sntp client enable 

Global Configuration mode command enables the Simple Network Time 

Protocol (SNTP) Broadcast and Anycast client on an interface. Use the 

no

 form of this command to 

disable the SNTP client.

Console(config)# 

sntp broadcast client enable

console(config)# 

sntp anycast client enable

book.book  Page 132  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands