manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 393

SSH Commands

393

Example

The following example generates DSA key pairs.

crypto key generate rsa

The 

crypto key generate rsa 

Global Configuration mode command generates RSA key pairs.

Syntax

•

crypto key generate rsa

Default Configuration

RSA key pairs do not exist.

Command Mode

Global Configuration mode.

User Guidelines

•

RSA keys are generated in pairs: one public RSA key and one private RSA key. If the device already has 
RSA keys, a warning and prompt to replace the existing keys with new keys are displayed.

•

This command is not saved in the device configuration; however, the keys generated by this command 
are saved in the private configuration which is never displayed to the user or backed up on another 
device. 

•

RSA keys are saved to the backup master.

•

This command may take a considerable period of time to execute.

Example

The following example generates RSA key pairs.

ip ssh pubkey-auth

The 

ip ssh pubkey-auth

 Global Configuration mode command enables public key authentication for 

incoming SSH sessions. Use the 

no

 form of this command to disable this function.

Syntax

•

ip ssh pubkey-auth

•

no ip ssh pubkey-auth

Console(config)# 

crypto key generate dsa

Console(config)# 

crypto key generate rsa

book.book  Page 393  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands