Dell PowerConnect 3500 Series Cli Reference Manual Download Page 47

Page: 47 / 538

Command Groups

PHY Diagnostics Commands

Power-over-Ethernet Commands

management access-class

Defines which management access-list is used.

Global Configuration

show management
access-list

Displays management access-lists.

Privileged EXEC

show management
access-class

Displays the active management access-list.

Privileged EXEC

Command Group

Description

Access Mode

test copper-port tdr

Diagnoses with TDR (Time Domain Reflectometry)
technology the quality and characteristics of a copper cable
attached to a port.

Privileged EXEC

show copper-ports tdr

Displays the last TDR (Time Domain Reflectometry) tests
on specified ports.

User EXEC

show copper-ports
cable-length

Displays the estimated copper cable length attached to a
port.

User EXEC

Command Group

Description

Access Mode

power inline

Configures the administrative mode of the inline
power on an interface.

Interface Configuration

power inline powered-
device

Adds a description of the powered device type
attached to the interface.

Interface Configuration

power inline priority

Displays port monitoring status.

Interface Configuration

power inline usage-
threshold

Configures the administrative mode of the inline
power on an interface.

Global Configuration

power inline traps
enable

Adds a description of the powered device type
attached to the interface.

Global Configuration

show power inline

Displays port monitoring status.

User EXEC

book.book Page 47 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands