manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 143

Configuration and Image Files

143

Use the 

copy source-url running-config

 command to load a ’configuration file’ from a network server to 

the device ’running configuration’. The configuration is added to the ’running configuration’ as if the 
commands were typed in the command-line interface (CLI). The resulting configuration file is a 
combination of the previous ’running configuration’ and the loaded ’configuration file", with the loaded 
"configuration file’ having precedence.

Copying a Configuration File from a Server to the Startup Configuration

Use the 

copy source-url startup-config

 command to copy a "configuration file" from a network server to 

the device ’startup configuration’. These commands replace the startup configuration file with the 
copied configuration file.

Storing the Running or Startup Configuration on a Server

Use the copy 

running-config

 

destination-url

 command to copy the current configuration file to a 

network server using TFTP. Use the copy 

startup-config

 

destination-url

 command to copy the ’startup 

configuration’ file to a network server.

The configuration file copy can serve as a backup copy.

Saving the Running Configuration to the Startup Configuration

Use the copy 

running-config

 

startup-config

 command to copy the ’running configuration’ to the ’startup 

configuration’. 

Backup the Running Configuration or Startup Configuration to a Backup Configuration file

Use the 

copy

 

running-config flash: //FILE_NAME 

to backup the running configuration to the backup 

configuration file. Use the 

copy

 

startup-config flash: //FILE_NAME 

command to backup the startup 

configuration to the backup configuration file.

Example

The following example copies a system image named file1 from the TFTP server with an IP address of 
172.16.101.101 to non active image file.

console# 

copy

 

tftp

://172.16.101.101/file1 

image

Accessing file 'file1' on 172.16.101.101...

Loading file1 from 172.16.101.101: 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!! [OK]

Copy took 0:01:11 [hh:mm:ss]

book.book  Page 143  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands