manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 475

VLAN Commands

475

Default Configuration

If the port is added to a VLAN without specifying tagged or untagged, the default setting is tagged.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

This command enables changing the egress rule (e.g., from tagged to untagged) without first removing 
the VLAN from the list.

Example

The following example adds VLANs 2, 5, and 6 to the allowed list of Ethernet port 1/e16 .

switchport general pvid

The 

switchport general pvid 

Interface Configuration mode command configures the PVID when the 

interface is in general mode. Use the 

no

 form of this command to return to the default configuration.

Syntax

•

switchport general pvid 

vlan-id

•

no switchport general pvid

•

vlan-id

 — Specifies the PVID (Port VLAN ID).

Default Configuration

If the default VLAN is enabled, PVID = 1. Otherwise, PVID=4095.

Command Mode

Interface Configuration (Ethernet, port-channel) mode.

User Guidelines

There are no user guidelines for this command.

Console(config)# 

interface ethernet

 1/e16

Console(config-if)# 

switchport general allowed vlan add

 2,5-6 

tagged

book.book  Page 475  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands