manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 493

Voice VLAN

493

Voice VLAN

voice vlan id

The 

voice vlan id

 Global Configuration mode command enables the voice VLAN, and configures 

the voice VALN id. To disable the voice VALN, enter the 

no

 form of this command.

Syntax

•

voice vlan id 

vlan-id

   

•

no voice vlan id

•

vlan-id

 — Specify the voice VLAN ID.

Default Configuration

Voice VLAN is not defined.

Command Mode

Global Configuration mode.

User Guidelines

The Voice VLAN feature is only active if the specified VLAN is already created. If the Voice VLAN 
feature is not active, all the voice VLAN parameters are kept as shadow parameters.

Example

The following example configures the voice VLAN

voice vlan oui-table

The

 voice vlan oui-table

 Global Configuration mode command configures the voice OUI table. 

Use the 

no

 form of this command to return to default.

Syntax

•

voice vlan oui-table {

add mac-address-prefix 

[description

 text

] | remove 

mac-address-prefix}

•

no voice vlan oui-table

Console (config)# 

voice vlan id 3

book.book  Page 493  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands