manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 65

Command Modes

65

ip http authentication

Specifies authentication methods for HTTP server users.

ip http exec-timeout

Enables the device to be configured from a secured browser.

ip http port

Specifies the TCP port for use by a web browser to configure the 
device.

ip http server

Enables the device to be configured from a browser.

ip https authentication

Specifies authentication methods for HTTPS server users.

ip https certificate

Configures the active certificate for HTTPS.

ip https exec-timeout

Sets the interval the system waits for user input before automatically 
logging off.

ip https port

Configures a TCP port for use by a secure web browser to configure 
the device. 

ip https server

Enables configuring the device from a secured browser.

ip igmp snooping (Global)

Enables Internet Group Management Protocol (IGMP) snooping.

ip name-server

Sets the available name servers.

ip ssh port

Specifies the port to be used by the SSH server.

ip ssh pubkey-auth

Enables public key authentication for incoming SSH sessions.

ip ssh server

Enables the device to be configured from a SSH server. 

lacp system-priority

Configures the system LACP priority.

line

Identifies a specific line for configuration and enters the line 
configuration command mode.

logging

Logs messages to a syslog server. 

logging buffered

Limits syslog messages displayed from an internal buffer based on 
severity. 

logging buffered size

Changes the number of syslog messages stored in the internal buffer.

logging console

Limits messages logged to the console based on severity. 

logging file

Limits syslog messages sent to the logging file based on severity. 

logging on

Controls error messages logging.

mac access-list

Creates Layer 2 ACLs.

management access-class

Defines which management access-list is used.

management access-list

Defines a management access-list, and enters the access-list for 
configuration.

management logging

Enables logging management access list events.

password min-length

Sets the minimum required length for passwords in the local 
database.

book.book  Page 65  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands