Dell PowerConnect 3500 Series Cli Reference Manual Download Page 467

Page: 467 / 538

User Interface

467

Example

This example dumps all output immediately after entering a show command.

show history

The

show history

User EXEC mode command lists the commands entered in the current session.

Syntax

•

show history

Default Configuration

This command has no default configuration.

Command Mode

User EXEC mode.

User Guidelines

•

The buffer includes executed and unexecuted commands.

•

Commands are listed from the first to the most recent command.

•

The buffer remains unchanged when entering into and returning from configuration modes.

Example

The following example displays all the commands entered while in the current Privileged EXEC mode.

Console>

terminal datadump

Console#

show version

SW version 3.131 (date 23-Jul-2004 time 17:34:19)

HW version 1.0.0

Console#

show clock

15:29:03 Jun 17 2004

Console#

show history

show version

show clock

show history

3 commands were logged (buffer size is 10)

book.book Page 467 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands