manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 144

144

Configuration and Image Files

delete

The 

delete 

Privileged EXEC mode command deletes a file from a flash memory device.

Syntax

•

delete 

url

•

url

 — The location URL or reserved keyword of the file to be deleted. (Range: 1 - 160 characters)

The following table displays keywords and URL prefixes:

Default Configuration

This command has no default configuration.

Command Mode

Privileged

 

EXEC mode.

User Guidelines

•

*.sys, *.prv, image-1 and image-2 files cannot be deleted.

Examples

The following example deletes file 

test

 from flash memory.

delete startup-config

The 

delete startup-config

 Privileged EXEC mode command deletes the startup-config file.

Syntax

•

delete startup-config

Default Configuration

This command has no default configuration.

Keyword

Source or Destination

flash:

Source or destination URL for flash memory. It is the default in case a URL is 
specified without a prefix.

startup-config

Represents the startup configuration file.

Console# 

delete flash:

test

Delete flash:test? [confirm]

book.book  Page 144  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands